What Dawbrain does in your Ableton Live Set.
You type what you want and it happens in the Set you have open: clips, devices and mixer moves, all ordinary Live material you can edit or undo. Here is what producers use it for, with requests you could send today.
Finish the track you started.
Most tracks don't stall at the first idea. They stall at bar 8, in a loop that never becomes a song. Bring the clips you already have and ask for a full track: Dawbrain lays them into the Arrangement with named sections, keeps your Session clips as they were, and leaves your sounds alone.
Want it your way? Give it a bar map (a 16-bar intro, the drop at 41, 96 bars in all) or change one section at a time.
- Turn my Session clips into a 3-minute arrangement
- Extend the second drop by 8 bars and keep the hats out
- Rename my tracks by what's on them
Turn my Session clips into a 3-minute arrangement
Here it is: 96 bars at 124 BPM, about three minutes. Parts come in and drop out by section, and your Session clips are untouched.
Arrangement · 12 clips added · 6 locators added
Work from a reference track.
Drop a track you love onto an audio track in your Set and use it as the target. Dawbrain listens to both and tells you, in numbers and in plain words, where yours differs: the low end, the loudness, how the energy moves from section to section.
Then it moves your track toward the reference one change at a time, and you approve each step.
- Compare my mix with the reference on track 1. What's the biggest difference?
- Mark the sections of the reference and lay my track out the same way
- Make my kick sit like the kick in the reference
- Write the melody from the first 8 bars of the reference onto my Serum track
The reference has to be audio in your Set. Links to YouTube, SoundCloud or Spotify don't work.
Compare my mix with the reference on track 1
Your drop is about 3 dB quieter than the reference and lighter in the low end. The reference also drops at bar 33, where yours waits until bar 49.
| Yours | Reference | |
|---|---|---|
| Loudness in the drop | -11.8 LUFS | -8.6 LUFS |
| Energy below 200 Hz | 31% | 42% |
| Width above 2 kHz | Narrow | Wide |
Track 1 · Reference
Write parts that fit the genre.
Ask for drums, a bassline, chords or a melody and they arrive as MIDI clips in the style you name, from techno and deep house to drill, jungle and bossa nova. Parts follow your key and tempo, drums land on the pads your kit actually has, and grooves come from your own groove pool.
The sounds come from where you choose: your own packs, Splice, or a one-shot, loop or song generated from a description.
- A rolling 16-bar bassline that follows my chords
- Find a dusty kick in my trap packs and build a Drum Rack around it
- Search Splice for a dark techno bass loop, 126 to 130 BPM
Deep house chords in A minor, 4 bars
Four bars of seventh chords in A minor on Keys, voiced close so they leave room for a vocal.
Keys New MIDI clip · 4 bars · A minor
Am7
i7
Fmaj7
VImaj7
Dm7
iv7
Em7
v7
Session view, slot 1122 BPM
Make it move.
A loop played for five minutes isn't a track yet. Ask for fills, breaks and transitions, automation that opens a filter across the last eight bars, or a part flipped to half time for the breakdown. Fills land at the end of a section and change from one section to the next.
- Add a fill every 8 bars and a 1-bar break before each drop
- Automate the reverb send up into the breakdown
Add a fill every 8 bars and open the filter into the drop
Added a one-bar fill at the end of every eight bars, each a little busier than the last, and drew the Pad's filter opening from bar 9 into the drop.
Arrangement · 4 clips added
Mix it, and ask how it sounds.
Dawbrain reads your mixer, your devices and your routing, and it listens to the result. Ask what's wrong with the low end and you get an answer about your track, not a mixing textbook. It sets values in real units ("cutoff to 400 Hz", "delay to a dotted eighth") and explains each choice in production terms.
For mastering, it gets your premaster into a sensible range: loudness, peaks and balance, checked against a reference if you have one, on a master chain built from Live's devices. It doesn't replace a mastering engineer.
- Listen to bars 33 to 48 and tell me what's not working
- Get the sub and the Reese sitting together
- Check my loudness and peaks before I bounce
Get the sub and the Reese sitting together
The Reese and the kick both peak around 55 Hz. I cut the Reese there, so the kick and the sub stop fighting.
Reese 2 settings changed
Turn a song into MIDI.
Select a song in the Arrangement and ask for it as MIDI. Dawbrain splits it into stems and writes the drums, bass and chords as MIDI clips on sounds from your library, keeping the vocal as audio. Each piece works on its own too: the chords of a sample, the bassline of a loop, the drum pattern from a break.
- Convert this to MIDI with similar sounds from my library
- Split the selected clip into stems
- What are the chords in this sample?
Convert this to MIDI with similar sounds from my library
Split the song into stems and wrote the drums, bass and chords as MIDI on sounds from your library. The stems I transcribed are muted, and the vocal keeps playing as audio.
Arrangement · 7 clips added
Use the plugins you own.
Dawbrain loads and controls VST3 instruments and effects, presets included. Serum 2, Vital, Diva, Hive, Pro-Q 4 and other popular plugins work out of the box, and any other VST3 plugin works after a one-time preparation you approve. AU-only plugins are out of reach.
- Load a dark pluck preset from Serum on track 4
- Save this track's effects as a rack
Load a pluck from Serum on track 4, darker and shorter
Loaded Dark Pluck from Serum 2's factory presets on track 4, then brought the filter down and shortened the decay.
Keys 2 settings changed
Fit your vocals to the track.
Place your takes against the arrangement, compare a new recording with the last one, or pull the vocal out of a song onto its own track. Need a voice you don't have? Generate one from a description.
- Move my vocal so the hook lands on the drop
- Compare my new takes on tracks 28 to 31 with the one on track 18
- Pull the vocal out of this song onto its own track
Move my vocal so the hook lands on the drop
Moved the vocal four bars later, so the hook starts on the drop at bar 17.
Arrangement · 1 moved
Learn as you go.
Ask why, not just what. Dawbrain answers questions about Live, sound design, theory and mixing in the context of the track you're working on.
- Why does the second drop hit harder than the first?
Why does the second drop hit harder than the first?
Three things in your Set. The bass comes back an octave lower, the hats move to sixteenths, and there are two bars of near silence before it, so the drop lands on a reset ear. The first drop has none of them.
Good to know before you start.
- Ableton Live 12.1 or newer, any edition from Intro to Suite, on macOS and Windows. No Live 11, no other DAWs.
- VST3 plugins only. AU-only plugins are out of reach.
- A part or a section at a time. One prompt won't write a finished song; build it up, or start from your own material.
- Big jobs take minutes. Each step costs 10 credits on Standard or 3 on Fast, and you see every step in the chat.
1,200 credits to start, no card.